DIY Short Matching Set | FREE Sewing Patterns | Zoe DIY

DIY Short Matching Set | FREE Sewing Patterns | Zoe DIY

Prepare
Fabric: Non-stretch fabric......  about 1.5-2 meter 
Marker
Coordinating thread

Universal ball point sewing needle
Elastic
Eyelets and tool kit
Hammer
Shoelace or twill tape
Punch a hole
Pins
Sewing machine
Download and print the pattern, piece together then trace the pattern pieces and cut out( go down and watch videos to know exactly). Re-measure the chest, waist, hips and the length of the sewing pattern to match your body, making sure you have finished before cutting on the fabric.

Sewing guidelines: use 1cm seam allowance. seam allowances are included in the pattern pieces
Press all seams. Finish all exposed seams by serging, sewing with a zig zag stitch or trimming with pinking shears to prevent fraying.

Prewash and dry your fabric

Step1: With right sides together (RST) align the dart leg markings and sew together. Start at the base of the dart and sew to the tip. Repeat other darts
 Step2: With RST 2 pieces (1 & 2) of front. Pin and sew . Repeat for other side and lining

Step3: With RST the front and the back. Pin and sew seam sides. Repeat for lining
 Step4: With RST fabric and lining. Pin and sew all rough edges of the blouse. Don't forget except for about 5 cm to flip top to the right

 Step5: Place the top eyelet pieces on either side of the cut to determine an even placement. Use punch a hole to cut  around the inside of each eyelet
Place your top on a very hard surface. Place the eyelet on top of the anvil and insert the eyelet barrel in the hole from the right side to the wrong side of the top. Place the washer over the barrel with the teeth side down. Position the stud end of the setter into the barrel of the eyelet and hammer forcefully. Repeat this for all of the eyelets.
 Step6: With RST 2 pieces (1 & 2) of front the short. Pin and sew . Repeat for other side and back
 Step7: Place front and back right sides together. Pin and sew out seams, Repeat for other leg
 Step8: With RST 2 leg. Pin and sew front and back crotch
 Step9: Fold waistband in half, right sides together, matching up the outer edges.
Butt the ends of the elastic together and use your sewing machine's stitch to sew them together.
Mark the elastic and the top of the short in quarters. Pin the elastic to the top inside edge of the short, matching the quarter marks. then sew with the top of short

 Step 10: Matching inseam. Pin,sew and Press
 Step11: Fold short hem 1/2" towards the wrong side and press. pin and sew around straight stitch. Repeat for other leg.



We are done!

Choosing your size: measure your bust, waist and hip and choose the corresponding size from the box size (XXS-XL)
Chart size (inch)
Chart size ( cm )

Link Pattern (Disables the Ad Blocking application to download FREE Patterns to your PCPrint on A4 - 100% zoom. Use Foxit Reader(pdf) software for best print quality
  ( This pattern is for personal use only... You may not sell items made with this Patterns, copy, sell, or redistribute this pattern in any form. Anyone deliberately does the opposite must be responsible for whatever happens. )






Ads that may annoy you but please don't using Ad Blocking application, it's almost the only way I can continue to share my resources with you next to Some supporters by buying me a Coffee (That is really precious thing). Thank you and hope you enjoy my content
FREE Patterns


















 DIY Sewing TOP|ZOE DIY

Share this:

Post a Comment

 
Copyright © Zoe DIY. Designed by OddThemes