DIY Sewing Sequin Warp Dress | FREE Sewing Pattern | Zoe DIY

DIY Sewing Sequin Warp Dress 

FREE Sewing Pattern | Zoe DIY

Prepare

Fabric: Sequin...  about 1-1.5 meter 

Marker

Coordinating thread

Universal ball point sewing needle

Pins

Sewing machine
 Video  ➥  https://goo.gl/y2515u
Download and print the pattern, piece together then trace the pattern pieces and cut out( go down and watch videos to know exactly). Re-measure the neck, shoulders, chest, waist, hips and the length of the sewing pattern to match your body, making sure you have finished before cutting on the fabric.

Sewing guidelines: use 1.2cm seam allowance. seam allowances are included in the pattern pieces
Press all seams. Finish all exposed seams by serging, sewing with a zig zag stitch or trimming with pinking shears to prevent fraying.


Prewash and dry your fabric


 Step2 With right sides together (RST) align the dart leg markings and sew together. Repeat with the Back
 Step3: Place two piece of front toward one side. Pin seam sides together then using a 1/8-inch seam allowance.

 Step4: Place front and back bodice right sides together, pin and sew shoulder seams. Press seam open.
 Step5: Fold neckline 1/4″ towards the wrong side and press. Pin and sew around using a long straight stitch. Repeat for armpit and hem left of front


 Step6: Sew One Side Seam
Fold the dress front and back right sides together, matching up the side seam . Pin and sew on one side of dress (right side). Using a serger, straight stitch or stretch stitch.
 Step7: Fold dress hem 1/2″ towards the wrong side and press. Pin and sew around using a long straight stitch
 Step8: Repeat step6 with other side of dress ( left side) and We are done!

SIMILAR ARTICLES