DIY Draped Cowl Neck Blouse
FREE pattern ep20 | Zoe diy
#zoediy, #sewingpattern #cowlneck
Marker
Coordinating thread
Universal ball point sewing needle
Pins
Sewing machine
Download and print the pattern, piece together then trace the pattern pieces and cut out. Re-measure the neck, chest, waist, hips and the length of the sewing pattern before cutting on your fabric.
Sewing guidelines: use 1.2cm seam allowance. seam allowances are included in the pattern pieces
Press all seams. Finish all exposed seams by serging, sewing with a zig zag stitch or trimming with pinking shears to prevent fraying.
Prewash and dry your fabric
Video: https://www.youtube.com/watch?v=7_V7qFszWj4Download and print the pattern, piece together then trace the pattern pieces and cut out. Re-measure the neck, chest, waist, hips and the length of the sewing pattern before cutting on your fabric.
Sewing guidelines: use 1.2cm seam allowance. seam allowances are included in the pattern pieces
Press all seams. Finish all exposed seams by serging, sewing with a zig zag stitch or trimming with pinking shears to prevent fraying.
Prewash and dry your fabric
Assembly
All step to sew
Step 3: Place front and back bodice right sides together, pin and sew shoulder seams. Press seam open.
Step 4: With right sides together (RST) align the dart leg markings and sew together. Start at the base of the dart and sew to the tip. Your last stitch should go right off the edge of the fabric. Instead of backstitching tie your thread tails in a double knot.
Step 5: With RST sew the sleeves into the arm openings. The placket should be on the back half of the shirt.
Step 6: With RST sew up the sleeve inseam and shirt side seam.
Step 7: Fold sleeve hem 1/2″ towards the wrong side and press. Pin and sew around using a long straight stitch.
We are done!
Chart size (inch)
Chart size ( cm )
DIY Sewing RagLan Sleeve Shirt |ZOE DIY
DIY Plaid Blazer Outfit Ep01 |ZOE DIY
DIY Short Matching Set |ZOE DIY
DIY Sewing Dress|ZOE DIY
DIY Sewing Halter Top|ZOE DIY
DIY Sewing Blouse|ZOE DIY
DIY Sewing Puff Sleeve Dress|ZOE DIY
DIY SEWING DRESS| ZOE DIY
DIY Sewing Jumpsuit|ZOE DIY
DIY Sewing Pleated Dress|ZOE DIY
DIY Sewing Top|ZOE DIY
DIY Sewing The Wide Leg Trouser|ZOE DIY
DIY Sewing Sequin Warp Dress|ZOE DIY
DIY Sewing A Line Skirt |ZOE DIY
DIY Sewing Blouse|ZOE DIY
DIY sewing Office Outfit Ep01|ZOE DIY
DIY sewing Office Outfit Ep02|ZOE DIY
DIY Sewing Shawl Neck Dress|ZOE DIY
DIY Sewing Sleeveless Dress|ZOE DIY
DIY Ruffle Wrap Dress|ZOE DIY
DIY women winter suit two pieces|ZOE DIY
DIY Sewing TOP|ZOE DIY
DIY sewing bishop sleeve top|ZOE DIY
DIY sewing blouse|ZOE DIY
DIY Draped Cowl Neck Blouse|ZOE DIY
DIY Sewing Gypsy Dress |ZOE DIY
DIY sewing Autumn jacket|ZOE DIY
DIY sewing chelsea collar top|ZOE DIY
DIY sewing culotte jumpsuit|ZOE DIY
DIY shoulder culotte jumpsuit |ZOE DIY
DIY Spaghetti strap and wide leg |ZOE DIY
DIY sewing hooded jacket|ZOE DIY
DIY sewing paper bag trouser |ZOE DIY
DIY sewing poet sleeve TOP|ZOE DIY
DIY sewing poet sleeve top|ZOE DIY
DIY sewing shoulder dress|ZOE DIY
DIY sewing shoulder strap dress |ZOE DIY
DIY sewing shoulder strap dress|ZOE DIY
DIY sewing sleep dress|ZOE DIY
DIY sewing tassels dress|ZOE DIY
DIY sewing sleeveless blouse |ZOE DIY
DIY two piece matching short set|ZOE DIY
DIY sewing short Jumpsuit|ZOE DIY
DIY two piece matching|ZOE DIY
DIY Winter Coat|ZOE DIY
DIY women winter suit two piece|ZOE DIY
DIY Women Autumn Suit Two Piece |ZOE DIY
DIY sewing wrap dress|ZOE DIY
DIY wrap bishop sleeve top |ZOE DIY
All step to sew
Step 1: With right side the bias tape and wrong side the back. Pin and sew
Step 2: Turn right side out and press. Baste stitch around the entire outer edge of your back bodice, using a 1/8″ seam allowance, to keep fabric in placeStep 4: With right sides together (RST) align the dart leg markings and sew together. Start at the base of the dart and sew to the tip. Your last stitch should go right off the edge of the fabric. Instead of backstitching tie your thread tails in a double knot.
Step 5: With RST sew the sleeves into the arm openings. The placket should be on the back half of the shirt.
Step 6: With RST sew up the sleeve inseam and shirt side seam.
Step 7: Fold sleeve hem 1/2″ towards the wrong side and press. Pin and sew around using a long straight stitch.
We are done!
#zoediy, #sewingpattern #cowlneck
#zoediy, #sewingpattern #cowlneck
Choosing your size: measure your bust, waist and hip and choose the corresponding size from the box size (XS-XXL)Chart size (inch)
Chart size ( cm )
Link Pattern (Disables the Ad Blocking application to download FREE Patterns to your PC) Print on A4 - 100% zoom. Use Foxit Reader(pdf) software for best print quality
➥ S
➥ M
( This pattern is for personal use only... You may not sell items made with this Patterns, copy, sell, or redistribute this pattern in any form. Anyone deliberately does the opposite must be responsible for whatever happens. )
Ads that may annoy you but please don't using Ad Blocking application, it's almost the only way I can continue to share my resources with you next to Some supporters by buying me a Coffee (That is really precious thing). Thank you and hope you enjoy my content

















































Post a Comment